1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
No — the SOLIX C800 Plus is underpowered for an Electric Chainsaw (14-inch)
No - this pairing is underpowered. Safe target ~2001W running / 6003W surge; the generator provides 1200W / 1600W.
- • Continuous power shortfall: needs 1740W (safe target ~2001W), generator provides 1200W.
- • Startup surge shortfall: needs 5220W (safe target ~6003W), generator provides 1600W.
Power Margin Analysis
1200W / 1600W Capacity Running 801W short
2001W required
Surge 4403W short
6003W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
FAILContinuous draw with safety buffer applied.
2,001W required -> 1,200W available (801W short)
Required 2,001W required
Available 1,200W
3
Surge Gate
FAILStartup peak with safety buffer applied.
6,003W required -> 1,600W available (4,403W short)
Required 6,003W required
Available 1,600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Runtime estimate appears after running and surge gates pass.
Power bars show required versus available output for each gate.
See generators that pass nativelyDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1200W
Running Power
🔋
768Wh
Capacity
⏱️
—
Est. Runtime
☀️
300W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 2001W; generator provides 1200W.
- 2 Surge headroom: target 6003W; generator provides 1600W.
- 3 Result: pick a higher-output unit for safe operation.
What To Do Instead
- 1 Underpowered: The Electric Chainsaw (14-inch) needs 2001W running / 6003W surge (with 15% buffer). The SOLIX C800 Plus provides 1200W / 1600W.
- 2 Safe target: Look for a power station with at least 2001W continuous and 6003W surge at 120V.
- 3 Compatible alternative: The Pecron E3600LFP (3600W / 7000W surge) clears this device's requirements.
Model-Specific Results
0 of 3 models are SAFE or TIGHT. Most demanding model: Makita UC3551A (14-inch, 14.5A, Heavy-Duty) (5,220W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| WORX WG305.1 (14-inch, 8A, Budget) | 960W | 2,880W | Fail | — | Engineering Est. |
Show expert analysisTechnical: **Running load:** 960W from OEM specs (8A × 120V). **Estimated startup surge:** 2880W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Compact design, auto chain tensioning, tool-free chain replacement. Field note: The WG305.1 is the best-selling electric chainsaw on Amazon US. At 8A it's the lowest-draw saw in this set and the most power-station-friendly. The estimated 2880W surge is the main compatibility factor — the 960W running load is manageable for most mid-range stations. Can a portable power station run the WORX WG305.1 chainsaw? Only if your power source can supply at least 960W continuous and approximately 2880W surge at 120V. The motor startup surge is the main challenge, not the running watts. | |||||
| Greenworks 20222 (14-inch, 10.5A) | 1,260W | 3,780W | Fail | — | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1260W from OEM specs (10.5A × 120V). **Estimated startup surge:** 3780W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. 10.5A motor provides more cutting torque than the 8A WORX for thicker branches. Field note: The Greenworks 20222 sits in the middle of this set at 10.5A. It draws 31% more than the WORX but delivers proportionally more cutting power. The estimated 3780W surge requires a power station with adequate startup capacity — stations under 4000W surge may struggle at initial trigger pull. Is the Greenworks 20222 harder to run on a power station than the WORX? Yes — 1260W versus 960W running, with an estimated 3780W versus 2880W surge. The Greenworks needs a power source with higher continuous and surge capacity. | |||||
| Makita UC3551A (14-inch, 14.5A, Heavy-Duty) | 1,740W | 5,220W | Fail | — | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1740W from OEM specs (14.5A × 120V). **Estimated startup surge:** 5220W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Heavy-duty motor at 2900 FPM chain speed, built-in soft start for smooth startups, current limiter to protect motor from burnout under overload. Field note: The UC3551A is the professional-grade corded chainsaw in this set. At 14.5A it draws 81% more than the budget WORX. Makita's built-in soft start may reduce the actual startup surge below the estimated 5220W, but no OEM starting current is published to confirm. The current limiter is a useful feature for generator use — it throttles power rather than causing a hard trip. Can a portable power station run the Makita UC3551A? Only if your power source can supply at least 1740W continuous and approximately 5220W surge at 120V. The built-in soft start may reduce actual surge below the 3x estimate, but without OEM data this cannot be confirmed. | |||||
How This Pairing Performs Across Our Database
This unit is outside the compatible set; 9 of 33 generators pass SAFE/TIGHT for this device.
How Electric Chainsaw (14-inch) Performs Across 33 Tested Generators
9 of 33 generators are SAFE+TIGHT for Electric Chainsaw (14-inch).
9
Safe+Tight
Safe 7 (21%)
Tight 2 (6%)
Fail 24 (73%)
Power Comparison: Anker SOLIX C800 Plus vs Top Alternatives for Electric Chainsaw (14-inch)
Anker SOLIX C800 Plus Fail
Current unit
Running 1,200W
Surge 1,600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Power Tools
Electric Chainsaw (14-inch)
Storm Cleanup
Select Your Model:
1740W
Running
5220W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 167% Utilization
2001W required 1200W Capacity
801W short
Surge/Startup Peak 375% Utilization
6003W required 1600W Capacity
4403W short
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
Electric Chainsaw (14-inch) vs SOLIX C800 Plus
Startup surge exceeds the power station limit. A soft starter may resolve the surge gap.
Compatible Alternatives to SOLIX C800 Plus
These generators meet Electric Chainsaw (14-inch)'s voltage, running, and surge requirements.
Best Value 
Pecron E3600LFP
3600W • 3072Wh
Runtime at your load
~1.2h
Capacity Fit Expandable to 15360Wh
Lowest capacity that still clears surge + running load.
Max Runtime 
Delta Pro
3600W • 3600Wh
Runtime at your load
~1.4h
Longest Runtime Expandable to 25000Wh
Expandable to 25000Wh.
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 1600W surge rating can support startup sequences for refrigerator compressors, well pumps, and similar inductive motor loads that draw 25 to 33 percent over running current during initial engagement. Once running, the 1200W continuous output can handle typical kitchen appliances, electronics, and power tools within rated limits. This combination addresses both inrush events and sustained runtime needs in backup scenarios.
This unit uses LFP chemistry, a battery architecture chosen for thermal stability in consumer power stations. The 768Wh capacity and 1200W continuous output allow sustained operation without thermal stress under typical residential loads. Source: Anker SOLIX C800 Plus Tech Specs (manufacturer documentation).
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 960W (8A) to 1740W (14.5A) depending on motor size. Estimated surge range: 2880W to 5220W at 3x running (motor-load multiplier — no electric chainsaw manufacturer publishes starting watts). Voltage: 120V AC for all corded models.
Expected Behavior
Electric chainsaws draw near-maximum rated power during cutting and drop to near-zero between cuts. Load spikes occur when the chain engages wood, especially in hardwood or thick limbs. At 2 hours daily use (storm cleanup), energy consumption ranges from 1920 to 3480 Wh depending on model.
Field Note
Motor startup surge is the primary compatibility concern. A chainsaw that draws 960W running may need 2880W briefly when you pull the trigger. The spread between budget (8A) and professional (14.5A) models is dramatic — nearly 2x in running watts and surge. Choose the smallest saw that handles your cutting needs to maximize compatibility with your power station.
Frequently Asked Questions
Can the Anker SOLIX C800 Plus power an Electric Chainsaw (14-inch)?
No. The Anker SOLIX C800 Plus falls short on both running (1200W offered vs 2001W needed) and surge (1600W offered vs 6003W needed). Safe targets include a 15% buffer for the Electric Chainsaw (14-inch)'s motor load profile.
How long will the SOLIX C800 Plus run an Electric Chainsaw (14-inch)?
No reliable runtime estimate — this pairing is not compatible. The Anker SOLIX C800 Plus cannot safely power the Electric Chainsaw (14-inch). See compatible alternatives above for power stations that meet this device's requirements.
Power Tip: To get the most out of your SOLIX C800 Plus, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Electric Chainsaw (14-inch)
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: anker-solix-c800-plus-electric-chainsaw-14inch 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Makita UC3551A (1740W at 14.5A). Surge worst case = Makita UC3551A (5220W). Surge estimated using 3x motor-load multiplier policy (no OEM starting watts published for any electric chainsaw in this class).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C800 Plus User Manual (EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →