1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Note: You are viewing specs for the original DELTA (Gen 1)
This legacy model has been officially replaced by a newer version with improved specs.
Yes, the DELTA (Gen 1) can run a CPAP Machine
This pairing clears the safety headroom. Required ~65W running and 120W surge; the DELTA (Gen 1) is rated 1800W / 3300W.
Power Margin Analysis
1800W / 3300W Capacity Running 1735W headroom
65W required
Surge 3180W headroom
120W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
65W required -> 1,800W available (1,735W headroom)
Required 65W required
Available 1,800W
3
Surge Gate
PASSStartup peak with safety buffer applied.
120W required -> 3,300W available (3,180W headroom)
Required 120W required
Available 3,300W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 15.7h
Device profile reference: up to 8h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1800W
Running Power
🔋
1260Wh
Capacity
⏱️
~15.7h
Est. Runtime
☀️
400W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 65W; generator provides 1800W.
- 2 Surge headroom: target 120W; generator provides 3300W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: ResMed AirSense 10 AutoSet (104W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| ResMed AirSense 11 AutoSet | 56.1W | 73.2W | Safe | ~15.7h | OEM Manual |
Show expert analysisTechnical: **Running load:** 56.1 W typical. **Surge:** 73.2 W peak. **Voltage:** 120 V AC. The machine draws continuous low power with minimal startup spike. Most portable power stations with 120V inverters and 100+ W output handle this load comfortably. Field note: Verify your power station provides stable 120V AC output and at least 75W continuous rating. Disable the heated humidifier to reduce draw by ~30% and extend runtime. Always carry a backup power source for life-critical equipment. Can I run the AirSense 11 on a 500Wh power station? Yes — at 56.1W typical, a 500Wh station (350Wh usable) provides roughly 6 hours. Disabling the humidifier drops draw to ~40W and extends runtime to a full night. | |||||
| ResMed AirSense 10 AutoSet | 53W | 104W | Safe | ~16.6h | OEM Manual |
Show expert analysisTechnical: **Running load:** 53 W typical. **Surge:** 104 W peak. **Voltage:** 120 V AC required. The AirSense 10 has a higher peak draw than the newer AirSense 11 due to its older motor design. Field note: The 104W peak is the sizing constraint. Ensure your power station can handle at least 120W continuous to cover the startup surge with margin. Use a pure sine wave inverter — modified sine wave may cause motor faults in medical devices. Can I use a portable power station rated for 100W continuous? Risky — the AirSense 10 peaks at 104W. A station rated at exactly 100W may trip on startup. Look for 150W+ continuous rating to be safe. | |||||
| Fisher & Paykel SleepStyle Auto | 39W | 76W | Safe | ~22.6h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 39 W typical. **Surge:** 76 W peak. **Voltage:** 120 V AC required. The SleepStyle has an integrated power supply (no external brick) and built-in heated humidifier. The 39W figure includes the humidifier at typical settings. Field note: The SleepStyle is the most power-efficient full-size CPAP here. At 39W typical, even a compact 500Wh power station covers a full night with margin. The integrated humidifier means no separate heater to add to the load. Is the Fisher & Paykel SleepStyle easier to run off-grid than ResMed? Yes — at 39W typical vs 53-56W for ResMed models, the SleepStyle draws roughly 30% less power. An 8-hour night consumes ~312 Wh vs 424-449 Wh for ResMed. | |||||
How This Pairing Performs Across Our Database
This unit ranks #16 of 33 compatible generators for this device by buffered margin (Overkill class).
How CPAP Machine Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for CPAP Machine.
33
Safe+Tight
Safe 33 (100%)
Power Comparison: EcoFlow DELTA (Gen 1) vs Top Alternatives for CPAP Machine
EcoFlow DELTA (Gen 1) Safe Overkill
Current unit
Running 1,800W
Surge 3,300W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Medical
CPAP Machine
8-Hour Sleep Session
Select Your Model:
56.1W
Running
104W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 4% Utilization
65W required 1800W Capacity
1735W headroom
Surge/Startup Peak 4% Utilization
120W required 3300W Capacity
3180W headroom
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 3300W surge capacity can handle typical startup demands from refrigerators, well pumps, and other motor-driven appliances that require brief inrush current. The 1800W continuous rating supports sustained loads like power tools, kitchen appliances, and electronics. Understand that this is a legacy unit no longer in active production.
This legacy model uses NMC lithium chemistry in a 1260Wh battery pack. The manufacturer documentation outlines operational guidelines and user precautions for safe charging and discharging cycles. Source: EcoFlow DELTA 1300 User Manual (manufacturer documentation). This model has been discontinued and replaced by newer generations.
Extend Runtime with Solar
Keep your CPAP Machine running with solar • MPPT: 10– 65V • Max: 400W
Official EcoFlow
400W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~4.5h Adapter required: MC4 -> XT60.
Smart Value Bluetti
350W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~5.1h Adapter required: MC4 -> XT60.
Smart Value Bluetti
200W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~9h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 39W (F&P SleepStyle) to 56.1W (ResMed AirSense 11) typical. Peak surge: 104W (ResMed AirSense 10 startup). Voltage: 120V AC. CPAP machines are low-draw medical devices — the startup surge is the sizing constraint, not the running watts.
Expected Behavior
Estimated runtime: ~15.7h. An 8-hour sleep session consumes 312-449 Wh depending on model, pressure settings, and humidifier use. Load is steady after initial pressurization with minor fluctuations during the breath cycle.
Field Note
Use a pure sine wave power station — modified sine wave inverters may cause motor faults in medical devices. Disable the heated humidifier to reduce draw by ~30% and extend runtime. Always carry a backup power source for life-critical equipment.
Frequently Asked Questions
Can the EcoFlow DELTA (Gen 1) power a CPAP Machine?
Yes. The EcoFlow DELTA (Gen 1) provides 1800W running / 3300W surge. The CPAP Machine needs 65W / 120W (including 15% buffer). That leaves 1735W of running headroom and 3180W of surge margin.
How long will the DELTA (Gen 1) run a CPAP Machine?
Approximately 15.7 hours, based on the CPAP Machine's 56W draw and the DELTA (Gen 1)'s 1260Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 675W allocated to the CPAP Machine, the DELTA (Gen 1) still has ~709W of margin. These devices could run simultaneously:
🩺
CPAP (No Humidifier)
40W
🌬️
Nebulizer
60W
❄️
Medical Fridge
80W
🥘
Slow Cooker
200W
💻
MacBook Air/Pro
65W
🎮
Gaming Laptop
230W
Pro Tip for Medical Users: According to energy reports, turning off the humidifier on your CPAP Machine can double your runtime. Using a DC cable instead of the AC plug is also recommended to avoid inverter inefficiency.
Compare all 33 generators for the CPAP Machine
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: ecoflow-delta-1300-cpap-machine 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = ResMed AirSense 11 (56.1W typical). Surge worst case = ResMed AirSense 10 (104W peak).
⚡ Generator Specs Source
OEM Verified
EcoFlow DELTA 1300 User Manual (V1.0)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.