Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
This pairing clears the safety headroom. Required ~1871W running and 1871W surge; the Delta Pro is rated 3600W / 7200W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
1,871W required -> 3,600W available (1,729W headroom)
Startup peak with safety buffer applied.
1,871W required -> 7,200W available (5,329W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 1.5h
Device profile reference: up to 0.3h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
4 of 4 models are SAFE or TIGHT. Most demanding model: Dyson Supersonic r Professional (1,700W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Dyson Supersonic Origin | 1,600W | 1,600W | Safe | ~1.6h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1600 W. **Surge:** 1600 W. Requires 120V AC. No surge multiplier indicates resistive heating element. Generator must supply at least 1600 W continuous at 120V to operate safely. Field note: Verify generator can sustain 1600 W before connecting. Allow 20% headroom above rated load for stable operation during peak heat cycles. Will this work on a 2000W generator? Only if your power source can supply at least 1600W continuous and 1600W surge at 120V. Check manufacturer load charts for real-world capacity under resistive heating. | |||||
| Dyson Supersonic r Professional | 1,700W | 1,700W | Safe | ~1.5h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1700 W. **Surge:** 1700 W (resistive heating element, no motor spike). Requires 120V AC supply. Generator must sustain 1700 W continuously without voltage sag during the 18-minute runtime window. Field note: Verify generator can deliver full rated wattage at 120V under load. Undersized units may experience voltage drop during simultaneous appliance operation, causing thermal cutoff. Can I run this hair dryer on a 2000W inverter generator? Only if your power source can supply at least 1700W continuous and 1700W surge at 120V. Inverter generators often derate at altitude or high ambient temperature. | |||||
| Shark FlexStyle HD400 (1400W) | 1,400W | 1,400W | Safe | ~1.8h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1400 W. **Surge:** 1400 W. Requires 120V AC supply. Resistive heating element yields identical running and surge demand. Generator must sustain continuous 1400 W output without voltage sag. Field note: Verify generator nameplate capacity exceeds 1400 W continuous. Voltage droop under load may reduce heating performance or trigger thermal shutdown. Can I run this styling tool on a 1500W portable generator? Only if your power source can supply at least 1400W continuous and 1400W surge at 120V. Marginal headroom increases risk of voltage sag and premature shutoff. | |||||
| Shark FlexStyle HD400 (1600W) | 1,600W | 1,600W | Safe | ~1.6h | OEM Verified |
Show expert analysisTechnical: **Running load:** 1600 W. **Surge load:** 1600 W. Requires 120V AC. Generator must supply continuous 1600 W minimum with no margin. Resistive heating element shows minimal inrush current. Field note: Zero headroom exists at 1600 W generator capacity. Any voltage sag or shared load will cause dropout. Verify available AC output rating before connecting. Can I run this on a 1600W generator? Only if your power source can supply at least 1600W continuous and 1600W surge at 120V. Any headroom deficit or shared circuit will interrupt operation. | |||||
This unit ranks #16 of 21 compatible generators for this device by buffered margin (Overkill class).
21 of 33 generators are SAFE+TIGHT for Professional Hair Dryer.
Fit class uses buffered needs (running and surge) for this device.
Morning Routine
Select Your Model:
Free Tools
The 7200W surge capacity can support typical motor-driven appliances during startup, including air compressor motors, well pumps, and refrigeration units that demand brief high-current events. The 3600Wh capacity provides extended runtime for moderate loads, though actual performance depends on connected equipment and environmental conditions. This unit can handle typical whole-home essentials when loads are properly managed.
The Delta Pro uses LFP chemistry, a lithium iron phosphate formulation widely recognized for thermal stability in residential applications. The manufacturer provides operational guidance in their documentation, but users must follow all installation and usage instructions to minimize risk. Source: EcoFlow DELTA Pro User Manual v1.1 (manufacturer documentation).
Keep your Professional Hair Dryer running with solar โข MPPT: 11โ 150V โข Max: 1600W
Official 400W Panel
Adapter required: MC4 -> XT60i.
Smart Value 400W Panel
Adapter required: MC4 -> XT60i.
Smart Value 350W Panel
Adapter required: MC4 -> XT60i.
Yes. The EcoFlow Delta Pro provides 3600W running / 7200W surge. The Professional Hair Dryer needs 1871W / 1871W (including 10% buffer). That leaves 1729W of running headroom and 5329W of surge margin.
Approximately 1.5 hours, based on the Professional Hair Dryer's 1700W draw and the Delta Pro's 3600Wh capacity (70% usable after real-world losses).
With 1005W allocated to the Professional Hair Dryer, the Delta Pro still has ~175W of margin. These devices could run simultaneously:
Power Tip: To get the most out of your Delta Pro, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Professional Hair Dryer
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = Dyson Supersonic r Professional (1700W). Surge = running (resistive heating element โ no motor inrush).
EcoFlow DELTA Pro User Manual v1.1
Similar-output alternatives you can compare side by side.