1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Yes, the Yeti 1500X can run a Dishwasher
This pairing clears the safety headroom. Required ~1981W running and 1981W surge; the Yeti 1500X is rated 2000W / 3500W.
Power Margin Analysis
2000W / 3500W Capacity Running 19W headroom
1981W required
Surge 1519W headroom
1981W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
1,981W required -> 2,000W available (19W headroom)
Required 1,981W required
Available 2,000W
3
Surge Gate
PASSStartup peak with safety buffer applied.
1,981W required -> 3,500W available (1,519W headroom)
Required 1,981W required
Available 3,500W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.6h
Device profile reference: up to 1h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
2000W
Running Power
🔋
1516Wh
Capacity
⏱️
~0.6h
Est. Runtime
☀️
600W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1981W; generator provides 2000W.
- 2 Surge headroom: target 1981W; generator provides 3500W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: KitchenAid KDTM404KPS (FreeFlex 3rd Rack, 15A, Extended Heat Dry) (1,800W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Whirlpool WDT750SAKZ (3rd Rack, 10A, Heated Dry) | 1,200W | 1,200W | Safe | ~0.9h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1200W from OEM specs (10A × 120V). **Surge:** 1200W — heating element dominant load with no significant motor inrush. **Voltage:** 120V AC. Standard US heated dry system with internal heating element for drying phase. Field note: The WDT750SAKZ is Whirlpool's current best-seller with AI Intelligent Wash. At 10A it's the lowest-draw dishwasher in this set. If running on a power station, consider disabling the heated dry option to reduce total energy consumption per cycle — air drying works fine and saves significant battery capacity. Can a portable power station run the Whirlpool WDT750SAKZ? Only if your power source can supply at least 1200W continuous at 120V. No startup surge — the heating element is the main load, not the wash motor. | |||||
| Bosch 300 Series SHE53C85N (46 dBA, Condensation Dry) | 1,450W | 1,450W | Safe | ~0.7h | OEM Manual |
Show expert analysisTechnical: **Running load:** 1450W max (OEM published). **Surge:** 1450W — heating element dominant load with no significant motor inrush. **Voltage:** 120V AC. Uses condensation drying (no dedicated heating element for drying phase) — drying relies on residual heat and the stainless steel tub. Field note: The Bosch 300 Series is the quietest mainstream dishwasher in the US at 46 dBA. Its condensation drying system avoids the high energy draw of heated dry — making it more battery-friendly over a full cycle than its 1450W peak rating suggests. The 1450W OEM rating vs. the 15A circuit requirement (1800W) shows that circuit specs overstate actual draw. Is the Bosch 300 Series efficient on a power station? It's the mid-range option at 1450W peak. The condensation drying system uses less total energy per cycle than heated-dry models, even though the peak wattage is higher than the 1200W Whirlpool. | |||||
| KitchenAid KDTM404KPS (FreeFlex 3rd Rack, 15A, Extended Heat Dry) | 1,800W | 1,800W | Safe | ~0.6h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1800W from OEM specs (15A × 120V). **Surge:** 1800W — heating element dominant load with no significant motor inrush. **Voltage:** 120V AC. Features Heat Dry and Extended Heat Dry options for active drying. FreeFlex third rack with 50+ wash jets. Field note: The KDTM404KPS is the highest-draw dishwasher in this set at 15A. It requires a power station rated for at least 1800W continuous — many mid-range stations top out at 1800W, leaving zero headroom. If running on battery power, skipping the Heat Dry option significantly reduces total energy consumption per cycle. Can a 2000W power station run the KitchenAid KDTM404KPS? Yes, but with only 200W of headroom at peak draw. The 1800W continuous load with no startup surge means a 2000W station can handle it, but don't run other appliances simultaneously. | |||||
How This Pairing Performs Across Our Database
This unit ranks #6 of 21 compatible generators for this device by buffered margin (Balanced class).
How Dishwasher Performs Across 33 Tested Generators
21 of 33 generators are SAFE+TIGHT for Dishwasher.
21
Safe+Tight
Safe 16 (48%)
Tight 5 (15%)
Fail 12 (36%)
Power Comparison: Goal Zero Yeti 1500X vs Top Alternatives for Dishwasher
Goal Zero Yeti 1500X Safe Balanced
Current unit
Running 2,000W
Surge 3,500W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Large Appliances
Dishwasher
Post-Meal Cleanup
Select Your Model:
1800W
Running
1800W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +10% Running Power Usage 99% Utilization
1981W required 2000W Capacity
19W headroom
Surge/Startup Peak 57% Utilization
1981W required 3500W Capacity
1519W headroom
Voltage Match 120V ↔ 120V ✓
⚠️
Before You Buy: Connection Check
Amperage check
This load may exceed a standard 15A outlet. Verify your station has a higher-amperage outlet (20A/30A) before purchase.
Compare Similar Units
Free Tools
Station Tools
Extend Runtime with Solar
Keep your Dishwasher running with solar • MPPT: 14– 50V • Max: 600W
Official Goal Zero
200W Panel
1 Hour Sun =
+0.1h per sun hour
Goal Zero proprietary -> Anderson adapter required
Full in ~10.8h Adapter required: Goal Zero proprietary -> Anderson adapter required.
Smart Value EcoFlow
400W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> Anderson
Full in ~5.4h Adapter required: MC4 -> Anderson.
Smart Value EcoFlow
220W Panel
1 Hour Sun =
+0.1h per sun hour
MC4 -> Anderson
Full in ~9.8h Adapter required: MC4 -> Anderson.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 1200W (10A) to 1800W (15A) depending on model and features. Surge: equals running watts — dishwashers are heating element dominant loads with no significant motor inrush. Voltage: 120V AC for all US residential models.
Expected Behavior
Estimated runtime: ~0.6h. Dishwashers cycle through wash, rinse, and dry phases over 1-2 hours. Peak draw occurs during water heating. The drying phase varies by technology: condensation drying (Bosch) uses residual heat with minimal added draw, while heated dry (US standard) activates a dedicated heating element. At 1 hour daily use, energy consumption ranges from 1200 to 1800 Wh.
Field Note
Drying technology is the key differentiator for power station compatibility. Condensation dry models (common in European brands) use less total energy per cycle than heated dry models (US standard). Disabling the heated dry option on any dishwasher reduces total energy consumption without affecting wash performance — dishes air-dry in 30-60 minutes.
Frequently Asked Questions
Can the Goal Zero Yeti 1500X power a Dishwasher?
Yes. The Goal Zero Yeti 1500X provides 2000W running / 3500W surge. The Dishwasher needs 1981W / 1981W (including 10% buffer). That leaves 19W of running headroom and 1519W of surge margin.
How long will the Yeti 1500X run a Dishwasher?
Approximately 0.6 hours, based on the Dishwasher's 1800W draw and the Yeti 1500X's 1516Wh capacity (70% usable after real-world losses).
Efficiency Hack: Large appliances like the Dishwasher cycle on and off. To maximize the 0.6 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the Dishwasher
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: goal-zero-yeti-1500x-dishwasher 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = KitchenAid KDTM404KPS (1800W at 15A). Surge = running (heating element dominant load — no significant motor inrush).
⚡ Generator Specs Source
OEM Verified
Goal Zero Yeti 1500X User Guide (147-100A)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.