1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
No — the SOLIX C300 is underpowered for a Dehumidifier (70 Pint)
No - this pairing is underpowered. Safe target ~1075W running / 4169W surge; the generator provides 300W / 300W.
- • Continuous power shortfall: needs 860W (safe target ~1075W), generator provides 300W.
- • Startup surge shortfall: needs 3335W (safe target ~4169W), generator provides 300W.
Power Margin Analysis
300W / 300W Capacity Running 775W short
1075W required
Surge 3869W short
4169W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
FAILContinuous draw with safety buffer applied.
1,075W required -> 300W available (775W short)
Required 1,075W required
Available 300W
3
Surge Gate
FAILStartup peak with safety buffer applied.
4,169W required -> 300W available (3,869W short)
Required 4,169W required
Available 300W
3b
With Soft-Start
FAILAlternative startup path with reduced inrush.
1,876W required -> 300W available (1,576W short)
Required 1,876W
Available 300W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Runtime estimate appears after running and surge gates pass.
Power bars show required versus available output for each gate.
See generators that pass nativelyDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
300W
Running Power
🔋
288Wh
Capacity
⏱️
—
Est. Runtime
☀️
100W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1075W; generator provides 300W.
- 2 Surge headroom: target 4169W; generator provides 300W.
- 3 Result: pick a higher-output unit for safe operation.
What To Do Instead
- 1 Underpowered: The Dehumidifier (70 Pint) needs 1075W running / 4169W surge (with 25% buffer). The SOLIX C300 provides 300W / 300W.
- 2 Safe target: Look for a power station with at least 1075W continuous and 4169W surge at 120V.
- 3 Compatible alternative: The Explorer 2000 Plus (3000W / 6000W surge) clears this device's requirements.
Model-Specific Results
0 of 3 models are SAFE or TIGHT. Most demanding model: Midea EasyDry MDP70SR71 (70 Pint) (3,335W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Midea EasyDry MDP70SR71 (70 Pint) | 690W | 3,335W | Fail | — | OEM Manual |
Show expert analysisTechnical: **Voltage:** 120V AC required. **Running load:** 690W. **Surge:** 3335W at startup (compressor-driven). Only power stations with inverter surge capacity ≥3335W and continuous output ≥690W are candidates. Field note: Verify the power station's surge window duration. Short-duration surge ratings may not accommodate refrigerant compressor startup transients reliably. Can I run this dehumidifier on a portable power station overnight? Only if your power source can supply at least 690W continuous and 3335W surge at 120V. It depends on the station's surge capacity and battery size. | |||||
| Midea EasyDry MDP70PR71 with Pump (70 Pint) | 690W | 3,335W | Fail | — | OEM Manual |
Show expert analysisTechnical: **Running load:** 690 W. **Surge demand:** 3,335 W at compressor start. Requires 120V AC output. Power station must deliver the full surge envelope without tripping overcurrent protection. Field note: Ensure your power station's inverter can handle the 3,335 W surge without shutdown. Verify outlet capacity exceeds continuous draw. Can I run this dehumidifier on a portable power station? Only if your power source can supply at least 690W continuous and 3335W surge at 120V. Most portable units cannot meet the surge requirement. | |||||
| Haier HEN70ETF (70 Pint) | 860W | 2,580W | Fail | — | OEM Verified |
Show expert analysisTechnical: **Running load:** 860W. **Surge:** 2580W at startup. Requires 120V AC output. Power station must sustain 860W continuous and handle 2580W compressor inrush without tripping. Field note: Size the power station to at least 125% of running load (1075W minimum output) to avoid nuisance shutdowns during concurrent household draw. Can I run this dehumidifier overnight on a portable power station? Only if your power source can supply at least 860W continuous and 2580W surge at 120V. Most portable units lack sufficient capacity for full-day basement moisture control. | |||||
How This Pairing Performs Across Our Database
This unit is outside the compatible set; 17 of 33 generators pass SAFE/TIGHT for this device.
How Dehumidifier (70 Pint) Performs Across 33 Tested Generators
17 of 33 generators are SAFE+TIGHT for Dehumidifier (70 Pint).
17
Safe+Tight
Safe 12 (36%)
Tight 5 (15%)
Soft Start 6 (18%)
Fail 10 (30%)
Power Comparison: Anker SOLIX C300 vs Top Alternatives for Dehumidifier (70 Pint)
Anker SOLIX C300 Fail
Current unit
Running 300W
Surge 300W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Heating & Cooling
Dehumidifier (70 Pint)
Basement Moisture Control
Select Your Model:
860W
Running
3335W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +25% Running Power Usage 358% Utilization
1075W required 300W Capacity
775W short
Surge/Startup Peak 1390% Utilization
4169W required 300W Capacity
3869W short
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
Dehumidifier (70 Pint) vs SOLIX C300
Startup surge exceeds the power station limit. A soft starter may resolve the surge gap.
⚠️
Before You Buy: Connection Check
Installation warning
These systems are often hardwired to a home panel. To run them from a portable station, you may need a transfer switch installed by an electrician. You cannot just plug it in.
Compatible Alternatives to SOLIX C300
These generators meet Dehumidifier (70 Pint)'s voltage, running, and surge requirements.
Best Value 
Explorer 2000 Plus
3000W • 2042Wh
Runtime at your load
~1.7h
Capacity Fit Expandable to 12000Wh
Lowest capacity that still clears surge + running load.
Max Runtime 
Delta Pro
3600W • 3600Wh
Runtime at your load
~2.9h
Longest Runtime Expandable to 25000Wh
Expandable to 25000Wh.
Compare Similar Units
Free Tools
Station Tools
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 860 W continuous. Surge demand: 3335 W at compressor startup. Voltage: 120 V AC required. Power station must handle the surge margin and sustain the load for the intended duration.
Expected Behavior
Operates 24 hours per day drawing approximately 20640 Wh daily. Compressor cycles cause brief high-current transients during startup then settles to steady draw.
Field Note
Verify the power station inverter rating exceeds 3335 W surge capacity. Undersized units will trip during compressor kick-in.
Frequently Asked Questions
Can the Anker SOLIX C300 power a Dehumidifier (70 Pint)?
No. The Anker SOLIX C300 falls short on both running (300W offered vs 1075W needed) and surge (300W offered vs 4169W needed). Safe targets include a 25% buffer for the Dehumidifier (70 Pint)'s compressor load profile.
How long will the SOLIX C300 run a Dehumidifier (70 Pint)?
No reliable runtime estimate — this pairing is not compatible. The Anker SOLIX C300 cannot safely power the Dehumidifier (70 Pint). See compatible alternatives above for power stations that meet this device's requirements.
Power Tip: To get the most out of your SOLIX C300, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Dehumidifier (70 Pint)
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: anker-solix-c300-dehumidifier-70pint 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Haier HEN70ETF (860W). Surge worst case = Midea EasyDry MDP70SR71 (3335W).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C300 User Manual (EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →