1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Can the SOLIX C300 Run a Pellet Grill? It Depends on Your Model
3 of 3 models are compatible with this generator.
Jump to model-specific results ↓Power Margin Analysis
300W / 300W Capacity Running 189W to 277W headroom by model
23W to 111W required
Surge Up to 190W headroom on lighter models; 45W short on demanding models
110W to 345W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
23W to 111W required -> 300W available (189W to 277W headroom)
Required 23W to 111W required
Available 300W
3
Surge Gate
PARTIALStartup peak with safety buffer applied.
110W to 345W required -> 300W available (190W headroom on lighter models)
Required 110W to 345W required
Available 300W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 2.1h
Device profile reference: up to 6h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
300W
Running Power
🔋
288Wh
Capacity
⏱️
~2.1h
Est. Runtime
☀️
100W
Solar Input
Quick Compatibility Check
- 1 3 of 3 models are compatible with the SOLIX C300.
- 2 Model requirements range from 20W to 96W running watts.
- 3 See the model-specific results table for per-model verdicts.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: Traeger Legacy (Non-WiFIRE, AC motor) (300W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Traeger Touchscreen Class (Pro 780, Ironwood 650/885) | 20W | 95W | Safe | ~10.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** ~20 W (estimated cook phase — auger motor + fan + controller after igniter shuts off). **Surge:** 95 W (igniter startup phase, first 4 minutes). Requires 120V AC output. After the igniter cycle, power drops dramatically. Field note: Current-generation Traeger grills are extremely efficient. Even a compact 300Wh power station can run a full 6-hour cook on a single charge. The 95W igniter startup is the only meaningful load. Can I run a Traeger Pro 780 on a portable power station? Yes — after the 4-minute ignition cycle (95W), the grill draws only ~20W. Most power stations handle this easily for extended cooks. | |||||
| Traeger D2 Class (WiFIRE, non-touchscreen) | 20W | 110W | Safe | ~10.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 20 W (cook phase — 0.17A high end of OEM range × 120V). **Surge:** 110 W (igniter startup). Requires 120V AC output. D2 Direct Drive uses DC brushless motors that are more efficient than Legacy AC motors. Field note: D2 grills sit between Legacy (300W startup) and Touchscreen (95W startup). The cooking draw is nearly identical to Touchscreen class — the difference is only in the igniter startup phase. What's the difference between D2 and Touchscreen power draw? D2 startup is 110W vs 95W for Touchscreen. After ignition, both draw approximately 10-20W during cooking. The difference is negligible for power station sizing. | |||||
| Traeger Legacy (Non-WiFIRE, AC motor) | 96W | 300W | Tight | ~2.1h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 96 W (cook phase — 0.8A high end of OEM range × 120V). **Surge:** 300 W (igniter startup, OEM published). Requires 120V AC output. Legacy AC motors draw 5-8x more than modern D2/Touchscreen grills during cooking. Field note: If you have an older non-WiFIRE Traeger, plan for 300W surge and 96W continuous. This is 5x the cooking draw of a modern Touchscreen model. A 500Wh station barely covers a 6-hour cook — a 1000Wh station is safer. Why does my old Traeger draw so much more than new models? Legacy non-WiFIRE Traegers use AC motors and a higher-wattage igniter (300W vs 95-110W). The cooking phase draws 48-96W vs 10-20W for D2/Touchscreen. Upgrading to a current model dramatically reduces power needs. | |||||
How This Pairing Performs Across Our Database
This unit ranks #1 of 33 compatible generators for this device by buffered margin (Overkill class).
How Pellet Grill Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for Pellet Grill.
33
Safe+Tight
Safe 32 (97%)
Tight 1 (3%)
Power Comparison: Anker SOLIX C300 vs Top Alternatives for Pellet Grill
Anker SOLIX C300 Tight Overkill
Current unit
Running 300W
Surge 300W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
⚡
Outdoor & RV
Pellet Grill
Outdoor BBQ Session
Select Your Model:
96W
Running
300W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 8% to 37% Utilization
23W to 111W required 300W Capacity
189W to 277W headroom by model
Surge/Startup Peak 37% to 115% Utilization
110W to 345W required 300W Capacity
Up to 190W headroom on lighter models; 45W short on demanding models
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
Pellet Grill vs SOLIX C300
Startup surge stays within the power station surge limit.
Compare Similar Units
Extend Runtime with Solar
Keep your Pellet Grill running with solar • MPPT: 11– 28V • Max: 100W
Smart Value Goal Zero
100W Panel
1 Hour Sun =
+0.7h per sun hour
Goal Zero proprietary -> XT60 adapter required
Full in ~4.1h Adapter required: Goal Zero proprietary -> XT60 adapter required.
Smart Value Rich Solar
100W Panel
1 Hour Sun =
+0.7h per sun hour
MC4 -> XT60
Full in ~4.1h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 96 W (worst case, Legacy Non-WiFIRE cook phase). Surge: 300 W (Legacy igniter startup). Voltage: 120 V AC required. Pellet grills have two distinct phases: a brief igniter startup (4-5 min, high draw) followed by hours of low-draw cooking (auger + fan only).
Expected Behavior
Estimated runtime: ~2.1h. Power draw depends heavily on controller generation. Modern Touchscreen models (Pro 780, Ironwood) draw 95W startup / ~20W cooking. Legacy Non-WiFIRE models draw 300W startup / 48-96W cooking. Most of the cook session is at the low running wattage.
Field Note
Check your Traeger's controller type before sizing a power station. A modern Touchscreen model runs all day on a 300Wh station. A Legacy Non-WiFIRE model needs 500-1000Wh for a full cook.
Frequently Asked Questions
Can the Anker SOLIX C300 power a Pellet Grill?
It depends on the model. 3 of 3 Pellet Grill models are compatible with the Anker SOLIX C300. See the model-specific results table for exact verdicts per model.
How long will the SOLIX C300 run a Pellet Grill?
It depends on the model. Compatible models run approximately 2.1–10.1 hours on the SOLIX C300. 0 of 3 models are not compatible. See the model-specific results for details.
What Else Can You Run?
With 135W allocated to the Pellet Grill, the SOLIX C300 still has ~9W of margin. These devices could run simultaneously:
💡
LED Lamp
10W
🌀
Box Fan (Medium)
60W
💻
MacBook Air/Pro
65W
Power Tip: To get the most out of your SOLIX C300, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Pellet Grill
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: anker-solix-c300-pellet-grill 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Traeger Legacy Non-WiFIRE (96W cook phase, 0.8A × 120V). Surge worst case = Traeger Legacy Non-WiFIRE (300W igniter startup, OEM direct).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C300 User Manual (EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.