Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
No - this pairing is underpowered. Safe target ~2235W running / 11070W surge; the generator provides 1800W / 2700W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
2,235W required -> 1,800W available (435W short)
Startup peak with safety buffer applied.
11,070W required -> 2,700W available (8,370W short)
Alternative startup path with reduced inrush.
4,982W required -> 2,700W available (2,282W short)
Runtime context only. It does not change the electrical compatibility verdict.
Runtime estimate appears after running and surge gates pass.
Power bars show required versus available output for each gate.
See generators that pass nativelyQuick compatibility, required headroom, and model-specific context at a glance.
0 of 3 models are SAFE or TIGHT. Most demanding model: Dometic Brisk II B57915.71X (13,500 BTU) (8,856W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Dometic Brisk II B57915.71X (13,500 BTU) | 1,788W | 8,856W | Fail | โ | OEM Manual |
Show expert analysisTechnical: This 13,500 BTU rooftop unit is a high continuous compressor load. Using OEM current and locked-rotor values, modeled running demand is 1788W with OEM-derived startup demand at 8856W. Field note: For RV battery systems, this is a realistic upper-bound 13.5k BTU profile to test first before selecting any smaller rooftop AC model. Can a portable power station run a 13,500 BTU RV rooftop AC? Only if it can cover this profile at 120V: 1788W running and 8856W startup (or equivalent soft-start handling). In practice, startup headroom is usually the limiting factor. | |||||
| Coleman-Mach 8 Plus (13,500 BTU) | 1,633W | 4,899W | Fail | โ | NEC Standard |
Show expert analysisTechnical: Coleman-Mach 8 Plus sits in the same rooftop AC class but with slightly lower modeled continuous draw than the Dometic worst case in this set. Field note: Treat this as a serious RV cooling load, not a light camping appliance. Prioritize surge headroom before runtime calculations. Can a portable power station run a 13,500 BTU RV rooftop AC? Only if it can cover this profile at 120V: 1788W running and 8856W startup (or equivalent soft-start handling). In practice, startup headroom is usually the limiting factor. | |||||
| Airxcel Mach 10 45203-8*6 (13,500 BTU) | 1,450W | 7,245W | Fail | โ | OEM Manual |
Show expert analysisTechnical: Mach 10 provides an OEM direct running watt value in the 13.5k BTU class, making it a useful mid-range benchmark for RV rooftop cooling. Field note: When comparing stations, check both sustained inverter output and startup tolerance. One without the other is not sufficient for rooftop AC duty. Can a portable power station run a 13,500 BTU RV rooftop AC? Only if it can cover this profile at 120V: 1788W running and 8856W startup (or equivalent soft-start handling). In practice, startup headroom is usually the limiting factor. | |||||
This unit is outside the compatible set; 3 of 33 generators pass SAFE/TIGHT for this device.
3 of 33 generators are SAFE+TIGHT for RV Rooftop AC (13,500 BTU).
Fit class uses buffered needs (running and surge) for this device.
RV Rooftop Cooling (Boondocking)
Select Your Model:
RVs often use a 30A plug. If the station only has standard outlets, you may need an adapter and will be limited to standard outlet power (~1800W).
These generators meet RV Rooftop AC (13,500 BTU)'s voltage, running, and surge requirements.
12000W โข 6144Wh
Lowest capacity that still clears surge + running load.
6000W โข 6144Wh
Highest available capacity for longer runtime.
Free Tools
The 2700W surge window can handle typical compressor startup on refrigerators, freezers, and sump pumps where inrush current briefly exceeds running draw. The 1152Wh capacity supports extended runtime for lower-wattage essentials. This configuration can support residential backup scenarios where brief peak demand is predictable and within spec.
This unit uses LFP chemistry and provides manufacturer-rated surge capacity for inductive startup events. Always verify that your specific appliance falls within the rated limits before connection. Source: BLUETTI AC180 User Manual (manufacturer documentation).
No. The Bluetti AC180 falls short on both running (1800W offered vs 2235W needed) and surge (2700W offered vs 11070W needed). Safe targets include a 25% buffer for the RV Rooftop AC (13,500 BTU)'s compressor load profile.
No reliable runtime estimate โ this pairing is not compatible. The Bluetti AC180 cannot safely power the RV Rooftop AC (13,500 BTU). See compatible alternatives above for power stations that meet this device's requirements.
Power Tip: To get the most out of your AC180, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the RV Rooftop AC (13,500 BTU)
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = Dometic Brisk II B57915.71X (1788W from 120V x (12.4A compressor + 2.5A fan)). Surge worst case = Dometic Brisk II B57915.71X (8856W from 120V x (68.0A compressor LRA + 5.8A fan locked rotor amps) from OEM table).
BLUETTI AC180 User Manual
Similar-output alternatives you can compare side by side.