Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
This pairing clears the safety headroom. Required ~259W running and 518W surge; the EB3A is rated 600W / 1200W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V available
Continuous draw with safety buffer applied.
259W required -> 600W available (341W headroom)
Startup peak with safety buffer applied.
518W required -> 1,200W available (682W headroom)
Alternative startup path with reduced inrush.
233W required -> 1,200W available (967W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.9h
Typical cycling estimate (40% duty): 2.3h
Device profile reference: up to 24h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
3 of 3 models are SAFE or TIGHT. Most demanding model: LG LMXS28596S Door-in-Door (27.8 cu.ft) (414W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| GE Profile PGD29BYTFS (28.7 cu.ft) | 195W | 390W | Safe | ~1.0h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 195W (derived from 681 kWh/yr at 40% duty cycle). **Surge:** 390W estimated (2x conservative multiplier โ compressor type not explicitly published). **Voltage:** 120V AC. Running watts represent active compressor draw, not the 15A minimum circuit rating on the nameplate. Field note: The GE Profile PGD29BYTFS is a Wi-Fi connected 4-door model. The 195W running draw and 390W surge make it highly compatible with most portable power stations. The real constraint for multi-day outages is battery capacity, not inverter output. Can I keep my GE Profile french door refrigerator running during a power outage? Only if your power source can supply at least 195W continuous and 390W surge at 120V. At ~78W average draw, a 1 kWh battery lasts roughly 13 hours between charges. | |||||
| Samsung RF29DB9900 Bespoke (28.6 cu.ft) | 200W | 400W | Safe | ~0.9h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 200W (derived from 700 kWh/yr at 40% duty cycle). **Surge:** 400W estimated (2x conservative multiplier โ compressor type not explicitly published in electrical specs). **Voltage:** 120V AC. The 700 kWh/yr EnergyGuide rating confirms this is a mid-range draw for a 28.6 cu.ft unit. Field note: The Samsung Bespoke 4-Door Flex is one of the best-selling premium french door refrigerators in the US. Its 200W running draw is well within the range of virtually all portable power stations. Battery capacity โ not output wattage โ is the limiting factor for multi-day backup. Can I run the Samsung Bespoke refrigerator on a portable power station during a blackout? Only if your power source can supply at least 200W continuous and 400W surge at 120V. At ~80W average draw, a 1 kWh battery lasts roughly 12.5 hours between charges. | |||||
| LG LMXS28596S Door-in-Door (27.8 cu.ft) | 207W | 414W | Safe | ~0.9h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 207W (derived from 724 kWh/yr at 40% duty cycle). **Surge:** 414W estimated (2x conservative multiplier โ compressor type not explicitly published in electrical specs). **Voltage:** 120V AC. The highest energy consumption in this comparison at 724 kWh/yr, driven by 27.8 cu.ft capacity and Door-in-Door feature. Field note: The LG Door-in-Door is the highest-draw model in this comparison at 207W running. The InstaView window and Door-in-Door compartment add thermal load from frequent partial opening. Even at worst case, any power station above 500W output can handle this refrigerator โ battery capacity is the real constraint. Can I keep my LG Door-in-Door refrigerator running on battery backup? Only if your power source can supply at least 207W continuous and 414W surge at 120V. At ~83W average draw, a 1 kWh battery lasts roughly 12 hours between charges. | |||||
This unit ranks #6 of 32 compatible generators for this device by buffered margin (Overkill class).
32 of 33 generators are SAFE+TIGHT for French Door Refrigerator.
Fit class uses buffered needs (running and surge) for this device.
72-Hour Power Outage
Select Your Model:
Free Tools
With 1200W surge capacity, the EB3A can handle typical compressor-based startup loads like refrigerators, sump pumps, and window air conditioners. The 268.8Wh capacity supports short-duration essential loads during outages. It can support intermittent cycling of motor-driven appliances when runtime demands stay within the available energy reserve.
The EB3A uses lithium iron phosphate (LFP) chemistry, known for stable performance in residential applications. Proper ventilation and adherence to manufacturer guidelines remain essential for safe operation. Source: BLUETTI EB3A User Manual (manufacturer documentation).
Keep your French Door Refrigerator running with solar โข MPPT: 12โ 28V โข Max: 200W
Smart Value 110W Panel
Adapter required: MC4 -> DC7909.
Smart Value 100W Panel
Adapter required: Goal Zero proprietary -> Bluetti proprietary adapter required.
Yes. The Bluetti EB3A provides 600W running / 1200W surge. The French Door Refrigerator needs 259W / 518W (including 25% buffer). That leaves 341W of running headroom and 682W of surge margin.
Approximately 0.9 hours, based on the French Door Refrigerator's 207W draw and the EB3A's 268.8Wh capacity (70% usable after real-world losses).
With 245W allocated to the French Door Refrigerator, the EB3A still has ~28W of margin. These devices could run simultaneously:
Efficiency Hack: Large appliances like the French Door Refrigerator cycle on and off. To maximize the 0.9 hours of runtime, try to minimize how often you open the device or introduce heat loads.
Compare all 33 generators for the French Door Refrigerator
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Worst case = LG LMXS28596S (207W running, 414W surge). Formula: avg_w = kWh_year ร 1000 / 8760; running_w = ceil(avg_w / 0.40); surge_w = ceil(running_w ร 2.0).
BLUETTI EB3A User Manual
Similar-output alternatives you can compare side by side.