1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Note: You are viewing specs for the original DELTA (Gen 1)
This legacy model has been officially replaced by a newer version with improved specs.
Can the DELTA (Gen 1) Run a Corded Drill / Hammer Drill? It Depends on Your Model
3 of 3 models are compatible with this generator.
Jump to model-specific results ↓Power Margin Analysis
1800W / 3300W Capacity Running 558W to 1041W headroom by model
759W to 1242W required
Surge Up to 1023W headroom on lighter models; 426W short on demanding models
2277W to 3726W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
759W to 1,242W required -> 1,800W available (558W to 1,041W headroom)
Required 759W to 1,242W required
Available 1,800W
3
Surge Gate
PARTIALStartup peak with safety buffer applied.
2,277W to 3,726W required -> 3,300W available (1,023W headroom on lighter models)
Required 2,277W to 3,726W required
Available 3,300W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 0.8h
Device profile reference: up to 1h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1800W
Running Power
🔋
1260Wh
Capacity
⏱️
~0.8h
Est. Runtime
☀️
400W
Solar Input
Quick Compatibility Check
- 1 3 of 3 models are compatible with the DELTA (Gen 1).
- 2 Model requirements range from 660W to 1080W running watts.
- 3 See the model-specific results table for per-model verdicts.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: DeWalt DW130V (1/2" Spade Handle, 9A, Mixer) (3,240W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| DeWalt DW130V (1/2" Spade Handle, 9A, Mixer) | 1,080W | 3,240W | Tight | ~0.8h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1080W from OEM specs (9.0A × 120V). **Estimated startup surge:** 3240W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Low-speed high-torque motor, 0-550 RPM variable speed, 1/2" keyed chuck. DeWalt lists 710W "Max Watts Out" — that's mechanical output power, not electrical input. Field note: The DW130V is the standard jobsite mud mixer in the US. At 9A it's the highest-draw tool in this set, but the real challenge is sustained load — mixing a 5-gallon bucket of mortar keeps the motor under heavy torque for 3-5 minutes straight. Size your power source for continuous 1080W output, not just peak capacity. Can a portable power station run the DeWalt DW130V mixer drill? Only if your power source can supply at least 1080W continuous and approximately 3240W surge at 120V. The sustained mixing load is the main challenge — this tool runs at near-maximum draw for minutes at a time. | |||||
| Bosch 11255VSR Bulldog Xtreme (SDS-plus, 8A, Rotary Hammer) | 960W | 2,880W | Tight | ~0.9h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 960W from OEM specs (8.0A × 120V). **Estimated startup surge:** 2880W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. SDS-plus rotary hammer, 3-mode operation (hammer+rotation, rotation only, hammer only), 0-1300 RPM, 0-5800 BPM, 2.0 ft-lbs impact energy. Field note: The Bulldog Xtreme is the best-selling SDS-plus rotary hammer in the US. At 960W running it's mid-range in this set, but the 2880W estimated surge requires a power station with adequate startup capacity. The 3-mode operation means you can use it as a light demo tool (hammer only) or a standard drill (rotation only) — same electrical draw regardless of mode. Can a portable power station run the Bosch Bulldog rotary hammer? Only if your power source can supply at least 960W continuous and approximately 2880W surge at 120V. The motor startup surge is the main challenge, not the running watts. | |||||
| Black+Decker DR260C (3/8", 5.5A, Budget) | 660W | 1,980W | Safe | ~1.3h | Engineering Est. |
Show expert analysisTechnical: **Running load:** 660W from OEM nameplate (5.5A × 120V). **Estimated startup surge:** 1980W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Variable-speed motor, 0-2500 RPM, 3/8" keyless chuck. Field note: The DR260C is the most power-station-friendly corded drill in this set. At 660W running and an estimated 1980W surge, it works with most power stations rated 1000W+ with adequate surge capacity. This is the budget option for DIYers who don't want to manage cordless batteries — but for serious jobsite work, the DW130V or Bulldog are the right tools. Can a small power station run the Black+Decker DR260C? Most stations rated 1000W+ continuous with 2000W surge can handle it. At 660W running with an estimated 1980W surge, this is the easiest corded drill to power in this set. | |||||
How This Pairing Performs Across Our Database
This unit ranks #1 of 18 compatible generators for this device by buffered margin (Balanced class).
How Corded Drill / Hammer Drill Performs Across 33 Tested Generators
18 of 33 generators are SAFE+TIGHT for Corded Drill / Hammer Drill.
18
Safe+Tight
Safe 13 (39%)
Tight 5 (15%)
Fail 15 (45%)
Power Comparison: EcoFlow DELTA (Gen 1) vs Top Alternatives for Corded Drill / Hammer Drill
EcoFlow DELTA (Gen 1) Tight Balanced
Current unit
Running 1,800W
Surge 3,300W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Power Tools
Corded Drill / Hammer Drill
Job Site Power
Select Your Model:
1080W
Running
3240W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 42% to 69% Utilization
759W to 1242W required 1800W Capacity
558W to 1041W headroom by model
Surge/Startup Peak 69% to 113% Utilization
2277W to 3726W required 3300W Capacity
Up to 1023W headroom on lighter models; 426W short on demanding models
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
Corded Drill / Hammer Drill vs DELTA (Gen 1)
Startup surge stays within the power station surge limit.
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 3300W surge capacity can handle typical startup demands from refrigerators, well pumps, and other motor-driven appliances that require brief inrush current. The 1800W continuous rating supports sustained loads like power tools, kitchen appliances, and electronics. Understand that this is a legacy unit no longer in active production.
This legacy model uses NMC lithium chemistry in a 1260Wh battery pack. The manufacturer documentation outlines operational guidelines and user precautions for safe charging and discharging cycles. Source: EcoFlow DELTA 1300 User Manual (manufacturer documentation). This model has been discontinued and replaced by newer generations.
Extend Runtime with Solar
Keep your Corded Drill / Hammer Drill running with solar • MPPT: 10– 65V • Max: 400W
Official EcoFlow
400W Panel
1 Hour Sun =
+0.3h per sun hour
MC4 -> XT60
Full in ~4.5h Adapter required: MC4 -> XT60.
Smart Value Bluetti
350W Panel
1 Hour Sun =
+0.2h per sun hour
MC4 -> XT60
Full in ~5.1h Adapter required: MC4 -> XT60.
Smart Value Bluetti
200W Panel
1 Hour Sun =
+0.1h per sun hour
MC4 -> XT60
Full in ~9h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 660W (5.5A) to 1080W (9A) depending on motor size and tool type. Estimated surge range: 1980W to 3240W at 3x running (motor-load multiplier — no corded drill manufacturer publishes starting watts). Voltage: 120V AC for all corded models.
Expected Behavior
Estimated runtime: ~0.8h. Corded drills and hammer drills draw near-maximum rated power under load and drop significantly between operations. Mixer drills are an exception — they run at sustained high load for minutes while mixing mortar or compound. At 1 hour daily use, energy consumption ranges from 660 to 1080 Wh depending on model.
Field Note
In 2025, corded drills are primarily a jobsite tool — mud mixers and rotary hammers where batteries overheat too quickly. Startup surge is the main compatibility concern: a drill that draws 1080W running may need 3240W briefly at startup. Size for surge capacity first, continuous output second.
Frequently Asked Questions
Can the EcoFlow DELTA (Gen 1) power a Corded Drill / Hammer Drill?
It depends on the model. 3 of 3 Corded Drill / Hammer Drill models are compatible with the EcoFlow DELTA (Gen 1). See the model-specific results table for exact verdicts per model.
How long will the DELTA (Gen 1) run a Corded Drill / Hammer Drill?
It depends on the model. Compatible models run approximately 0.8–1.3 hours on the DELTA (Gen 1). 0 of 3 models are not compatible. See the model-specific results for details.
What Else Can You Run?
With 290W allocated to the Corded Drill / Hammer Drill, the DELTA (Gen 1) still has ~70W of margin. These devices could run simultaneously:
📺
55' LED TV
80W
💡
LED Lamp
10W
🌀
Box Fan (Medium)
60W
💻
MacBook Air/Pro
65W
🌬️
Nebulizer
60W
📡
Wifi Router
15W
Power Tip: To get the most out of your DELTA (Gen 1), keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Corded Drill / Hammer Drill
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: ecoflow-delta-1300-drill-corded 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = DeWalt DW130V (1080W at 9.0A). Surge worst case = DeWalt DW130V (3240W). Surge estimated using 3x motor-load multiplier policy (no OEM starting watts published for any corded drill in this class).
⚡ Generator Specs Source
OEM Verified
EcoFlow DELTA 1300 User Manual (V1.0)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.