1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
Note: You are viewing specs for the original DELTA (Gen 1)
This legacy model has been officially replaced by a newer version with improved specs.
Yes, the DELTA (Gen 1) can run an E-Bike Charger
This pairing clears the safety headroom. Required ~230W running and 230W surge; the DELTA (Gen 1) is rated 1800W / 3300W.
Power Margin Analysis
1800W / 3300W Capacity Running 1570W headroom
230W required
Surge 3070W headroom
230W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
PASSContinuous draw with safety buffer applied.
230W required -> 1,800W available (1,570W headroom)
Required 230W required
Available 1,800W
3
Surge Gate
PASSStartup peak with safety buffer applied.
230W required -> 3,300W available (3,070W headroom)
Required 230W required
Available 3,300W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 4.4h
Device profile reference: up to 4h per day.
Power bars show required versus available output for each gate.
View full compatibility reportDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1800W
Running Power
🔋
1260Wh
Capacity
⏱️
~4.4h
Est. Runtime
☀️
400W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 230W; generator provides 1800W.
- 2 Surge headroom: target 230W; generator provides 3300W.
- 3 Tip: leave headroom for startup spikes and warm conditions.
Model-Specific Results
3 of 3 models are SAFE or TIGHT. Most demanding model: Specialized Turbo Battery Charger (42V 4A) (200W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Rad Power Bikes Charger (48V 2A) | 130W | 130W | Safe | ~6.8h | Engineering Est. |
Show expert analysisTechnical: **Running load:** ~130W AC input (estimated). **Surge:** 130W (no inrush — switching power supply with gradual ramp). **Voltage:** 120V AC. The Rad charger outputs 54.6V at 2A (109W DC) to charge 48V lithium batteries. AC-to-DC conversion loss adds roughly 20% overhead. Field note: At 130W, this is one of the lightest loads you can connect to a power station. A 500Wh station can deliver roughly 2.5 hours of charging (adding ~45% battery). Ideal for topping off at camp or in an RV. The charger's multi-voltage input (100-240V) handles modified sine wave inverters without issues. Can I charge my Rad e-bike from a portable power station? Yes — easily. The charger draws only ~130W, which is well within any power station rated 200W or above. A 1000Wh station can deliver a near-complete charge. Perfect for bikepacking, RV trips, or emergency backup. | |||||
| Specialized Turbo Battery Charger (42V 4A) | 200W | 200W | Safe | ~4.4h | Engineering Est. |
Show expert analysisTechnical: **Running load:** ~200W AC input (estimated). **Surge:** 200W (no inrush). **Voltage:** 120V AC. The Specialized Turbo charger is a 4A fast charger for 36V battery systems (42V max charge voltage). At double the output current of standard 2A chargers, it cuts charge time roughly in half but draws proportionally more from the wall. Field note: This is the highest-draw e-bike charger in common use. At 200W, it still qualifies as a light load for most power stations, but plan your capacity accordingly — a full charge consumes about 600Wh. For longer trips, consider carrying the standard 2A charger instead (half the draw, double the charge time). Can I charge my Specialized Turbo Levo from a portable power station? Yes. The 4A fast charger draws ~200W — any power station rated 300W or above handles it. A 1000Wh station provides a near-complete charge. For multi-day trips, the lower-wattage 2A charger option stretches your power station further. | |||||
| Lectric eBikes Charger (48V 2A) | 130W | 130W | Safe | ~6.8h | Engineering Est. |
Show expert analysisTechnical: **Running load:** ~130W AC input (estimated). **Surge:** 130W (no inrush — electronic switching charger). **Voltage:** 120V AC. The Lectric charger outputs 54.6V at 2A (109W DC) for 48V lithium batteries used in the XP 3.0, XPedition, and XPremium lines. Electrical profile is nearly identical to other 48V/2A e-bike chargers. Field note: Lectric's charger uses a 3-pin connector (not the barrel plug common on other brands). Make sure you have the correct charger for your model. At 130W, virtually any power station with a working AC outlet can charge this bike — it's lighter than running a single lightbulb. Can I charge my Lectric XP 3.0 from a portable power station while camping? Absolutely. The charger draws only ~130W — even a compact 300Wh power station provides over 1.5 hours of charging. A 1000Wh station can fully charge the battery with room to spare. | |||||
How This Pairing Performs Across Our Database
This unit ranks #16 of 33 compatible generators for this device by buffered margin (Overkill class).
How E-Bike Battery Charger Performs Across 33 Tested Generators
33 of 33 generators are SAFE+TIGHT for E-Bike Battery Charger.
33
Safe+Tight
Safe 33 (100%)
Power Comparison: EcoFlow DELTA (Gen 1) vs Top Alternatives for E-Bike Battery Charger
EcoFlow DELTA (Gen 1) Safe Overkill
Current unit
Running 1,800W
Surge 3,300W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
⚡
EV & Transportation
E-Bike Battery Charger
Battery Charging
Select Your Model:
200W
Running
200W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 13% Utilization
230W required 1800W Capacity
1570W headroom
Surge/Startup Peak 7% Utilization
230W required 3300W Capacity
3070W headroom
Voltage Match 120V ↔ 120V ✓
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 3300W surge capacity can handle typical startup demands from refrigerators, well pumps, and other motor-driven appliances that require brief inrush current. The 1800W continuous rating supports sustained loads like power tools, kitchen appliances, and electronics. Understand that this is a legacy unit no longer in active production.
This legacy model uses NMC lithium chemistry in a 1260Wh battery pack. The manufacturer documentation outlines operational guidelines and user precautions for safe charging and discharging cycles. Source: EcoFlow DELTA 1300 User Manual (manufacturer documentation). This model has been discontinued and replaced by newer generations.
Extend Runtime with Solar
Keep your E-Bike Battery Charger running with solar • MPPT: 10– 65V • Max: 400W
Official EcoFlow
400W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~4.5h Adapter required: MC4 -> XT60.
Smart Value Bluetti
350W Panel
1 Hour Sun =
Runs Indefinitely
MC4 -> XT60
Full in ~5.1h Adapter required: MC4 -> XT60.
Smart Value Bluetti
200W Panel
1 Hour Sun =
+0.7h per sun hour
MC4 -> XT60
Full in ~9h Adapter required: MC4 -> XT60.
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running load: 130–200W depending on charger output (2A standard vs 4A fast). Surge: Equal to running watts (no inrush — electronic switching power supplies). Voltage: 120V AC. E-bike chargers are simple AC-to-DC converters that output 42-54.6V DC to lithium battery packs. No e-bike charger manufacturer publishes AC input watts directly — values are derived from DC output divided by typical ~83% power supply efficiency.
Expected Behavior
Estimated runtime: ~4.4h. Draws a steady, flat load for the entire 3-6 hour charge cycle. No cycling, no surges, no standby spikes. Total energy per full charge ranges from 500-800Wh depending on battery size. This is one of the lightest and most predictable loads you can connect to a portable power station.
Field Note
E-bike charging is an ideal use case for portable power stations — low wattage, flat load profile, and compatible with virtually any inverter type (pure sine or modified sine). For multi-day bikepacking or RV travel, pair a 200W solar panel with a 1000Wh station for indefinite off-grid charging. The charger's universal 100-240V input handles voltage fluctuations well.
Frequently Asked Questions
Can the EcoFlow DELTA (Gen 1) power an E-Bike Charger?
Yes. The EcoFlow DELTA (Gen 1) provides 1800W running / 3300W surge. The E-Bike Battery Charger needs 230W / 230W (including 15% buffer). That leaves 1570W of running headroom and 3070W of surge margin.
How long will the DELTA (Gen 1) run an E-Bike Charger?
Approximately 4.4 hours, based on the E-Bike Battery Charger's 200W draw and the DELTA (Gen 1)'s 1260Wh capacity (70% usable after real-world losses).
What Else Can You Run?
With 1065W allocated to the E-Bike Battery Charger, the DELTA (Gen 1) still has ~175W of margin. These devices could run simultaneously:
🌀
Box Fan (Medium)
60W
💡
LED Lamp
10W
🔥
Space Heater (Eco)
750W
📺
55' LED TV
80W
💻
MacBook Air/Pro
65W
🧊
Portable Ice Maker
100W
Power Tip: To get the most out of your DELTA (Gen 1), keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the E-Bike Battery Charger
Ranked by budget, runtime, and overall compatibility.
Related Guides: How to Size a Power Station
Technical Sourcing & Verification
ID: ecoflow-delta-1300-e-bike-charger 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = Specialized Turbo charger (200W). No e-bike charger OEM publishes AC input watts directly — all values derived from DC output watts ÷ 0.83 assumed efficiency (1.2× multiplier). Electronic charger = no inrush surge.
⚡ Generator Specs Source
OEM Verified
EcoFlow DELTA 1300 User Manual (V1.0)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.