Skip to main content
GeneratorChecker
✕
Not Compatible
Mixed Data One side verified • See methodology → ✓ Generator ○ Device

No — the Explorer 300 Plus is underpowered for an Electric Chainsaw (14-inch)

No - this pairing is underpowered. Safe target ~2001W running / 6003W surge; the generator provides 300W / 600W.

  • • Continuous power shortfall: needs 1740W (safe target ~2001W), generator provides 300W.
  • • Startup surge shortfall: needs 5220W (safe target ~6003W), generator provides 600W.

Power Margin Analysis

300W / 600W Capacity
Running 1701W short
2001W required
Surge 5403W short
6003W required

Decision Gate Waterfall

Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.

1

Voltage Gate

PASS

Device output type must match generator output.

120V required -> 120V available

2

Running Gate

FAIL

Continuous draw with safety buffer applied.

2,001W required -> 300W available (1,701W short)

Required 2,001W required
Available 300W
3

Surge Gate

FAIL

Startup peak with safety buffer applied.

6,003W required -> 600W available (5,403W short)

Required 6,003W required
Available 600W
4

Runtime Insight

INFO

Runtime context only. It does not change the electrical compatibility verdict.

Runtime estimate appears after running and surge gates pass.

Power bars show required versus available output for each gate.

See generators that pass natively

Decision Snapshot

Quick compatibility, required headroom, and model-specific context at a glance.

⚡
300W
Running Power
🔋
288Wh
Capacity
⏱️
—
Est. Runtime
☀️
100W
Solar Input

Quick Compatibility Check

  1. 1 Running headroom: target 2001W; generator provides 300W.
  2. 2 Surge headroom: target 6003W; generator provides 600W.
  3. 3 Result: pick a higher-output unit for safe operation.

What To Do Instead

  1. 1 Underpowered: The Electric Chainsaw (14-inch) needs 2001W running / 6003W surge (with 15% buffer). The Explorer 300 Plus provides 300W / 600W.
  2. 2 Safe target: Look for a power station with at least 2001W continuous and 6003W surge at 120V.
  3. 3 Compatible alternative: The Pecron E3600LFP (3600W / 7000W surge) clears this device's requirements.

Model-Specific Results

0 of 3 models are SAFE or TIGHT. Most demanding model: Makita UC3551A (14-inch, 14.5A, Heavy-Duty) (5,220W surge).

Model Running Surge Verdict Runtime Source
WORX WG305.1 (14-inch, 8A, Budget) 960W 2,880W Fail — Engineering Est.
Show expert analysis

Technical: **Running load:** 960W from OEM specs (8A × 120V). **Estimated startup surge:** 2880W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Compact design, auto chain tensioning, tool-free chain replacement.

Field note: The WG305.1 is the best-selling electric chainsaw on Amazon US. At 8A it's the lowest-draw saw in this set and the most power-station-friendly. The estimated 2880W surge is the main compatibility factor — the 960W running load is manageable for most mid-range stations.

Can a portable power station run the WORX WG305.1 chainsaw?

Only if your power source can supply at least 960W continuous and approximately 2880W surge at 120V. The motor startup surge is the main challenge, not the running watts.
Greenworks 20222 (14-inch, 10.5A) 1,260W 3,780W Fail — Engineering Est.
Show expert analysis

Technical: **Running load:** 1260W from OEM specs (10.5A × 120V). **Estimated startup surge:** 3780W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. 10.5A motor provides more cutting torque than the 8A WORX for thicker branches.

Field note: The Greenworks 20222 sits in the middle of this set at 10.5A. It draws 31% more than the WORX but delivers proportionally more cutting power. The estimated 3780W surge requires a power station with adequate startup capacity — stations under 4000W surge may struggle at initial trigger pull.

Is the Greenworks 20222 harder to run on a power station than the WORX?

Yes — 1260W versus 960W running, with an estimated 3780W versus 2880W surge. The Greenworks needs a power source with higher continuous and surge capacity.
Makita UC3551A (14-inch, 14.5A, Heavy-Duty) 1,740W 5,220W Fail — Engineering Est.
Show expert analysis

Technical: **Running load:** 1740W from OEM specs (14.5A × 120V). **Estimated startup surge:** 5220W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Heavy-duty motor at 2900 FPM chain speed, built-in soft start for smooth startups, current limiter to protect motor from burnout under overload.

Field note: The UC3551A is the professional-grade corded chainsaw in this set. At 14.5A it draws 81% more than the budget WORX. Makita's built-in soft start may reduce the actual startup surge below the estimated 5220W, but no OEM starting current is published to confirm. The current limiter is a useful feature for generator use — it throttles power rather than causing a hard trip.

Can a portable power station run the Makita UC3551A?

Only if your power source can supply at least 1740W continuous and approximately 5220W surge at 120V. The built-in soft start may reduce actual surge below the 3x estimate, but without OEM data this cannot be confirmed.

How This Pairing Performs Across Our Database

This unit is outside the compatible set; 9 of 33 generators pass SAFE/TIGHT for this device.

How Electric Chainsaw (14-inch) Performs Across 33 Tested Generators

9 of 33 generators are SAFE+TIGHT for Electric Chainsaw (14-inch).

9 Safe+Tight
Safe 7 (21%)
Tight 2 (6%)
Fail 24 (73%)

Power Comparison: Jackery Explorer 300 Plus vs Top Alternatives for Electric Chainsaw (14-inch)

Fit class uses buffered needs (running and surge) for this device.

Specs & Surge Analysis

Electric Chainsaw (14-inch)
Power Tools

Electric Chainsaw (14-inch)

Storm Cleanup

Select Your Model:

WORX WG305.1 (14-inch, 8A, Budget)
960W / 2880W
Est.
Greenworks 20222 (14-inch, 10.5A)
1260W / 3780W
Est.
Makita UC3551A (14-inch, 14.5A, Heavy-Duty)
1740W / 5220W
Est.
1740W
Running
5220W
Surge
120V
Required

True Surge™ Analysis

Safety Buffer: +15%
Running Power Usage 667% Utilization
2001W required 300W Capacity
1701W short
Surge/Startup Peak 1001% Utilization
6003W required 600W Capacity
5403W short
Voltage Match 120V ↔ 120V ✓

Startup Surge Visual

Compatible Alternatives to Explorer 300 Plus

These generators meet Electric Chainsaw (14-inch)'s voltage, running, and surge requirements.

Best Value Pecron E3600LFP

Pecron E3600LFP

3600W • 3072Wh

Runtime at your load
~1.2h
Capacity Fit Expandable to 15360Wh

Lowest capacity that still clears surge + running load.

View analysis →
Max Runtime Delta Pro

Delta Pro

3600W • 3600Wh

Runtime at your load
~1.4h
Longest Runtime Expandable to 25000Wh

Expandable to 25000Wh.

View analysis →

Compare Similar Units

SOLIX C300
SOLIX C300
300W • 288Wh
RIVER 2
RIVER 2
300W • 256Wh

Free Tools

Station Tools

⚡
Calculator
Size for multiple devices
 🔌
Surge Calculator
Convert LRA to surge watts

Generator Insights

Best for phones, laptops, and small essentials. Not suited for high-surge appliances.

LFP chemistry with a long 3,000-cycle rating for the class. USB-C solar input is limited to 100W.

Technical Analysis

Spec-Based • No Guarantees

Technical Breakdown

Running range: 960W (8A) to 1740W (14.5A) depending on motor size. Estimated surge range: 2880W to 5220W at 3x running (motor-load multiplier — no electric chainsaw manufacturer publishes starting watts). Voltage: 120V AC for all corded models.

Expected Behavior

Electric chainsaws draw near-maximum rated power during cutting and drop to near-zero between cuts. Load spikes occur when the chain engages wood, especially in hardwood or thick limbs. At 2 hours daily use (storm cleanup), energy consumption ranges from 1920 to 3480 Wh depending on model.

Field Note

Motor startup surge is the primary compatibility concern. A chainsaw that draws 960W running may need 2880W briefly when you pull the trigger. The spread between budget (8A) and professional (14.5A) models is dramatic — nearly 2x in running watts and surge. Choose the smallest saw that handles your cutting needs to maximize compatibility with your power station.

Frequently Asked Questions

Can the Jackery Explorer 300 Plus power an Electric Chainsaw (14-inch)?

No. The Jackery Explorer 300 Plus falls short on both running (300W offered vs 2001W needed) and surge (600W offered vs 6003W needed). Safe targets include a 15% buffer for the Electric Chainsaw (14-inch)'s motor load profile.

How long will the Explorer 300 Plus run an Electric Chainsaw (14-inch)?

No reliable runtime estimate — this pairing is not compatible. The Jackery Explorer 300 Plus cannot safely power the Electric Chainsaw (14-inch). See compatible alternatives above for power stations that meet this device's requirements.

Power Tip: To get the most out of your Explorer 300 Plus, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.

Compare all 33 generators for the Electric Chainsaw (14-inch)

Ranked by budget, runtime, and overall compatibility.

See full ranking
Related Guides: How to Size a Power Station What Are Surge Watts?
Technical Sourcing & Verification
ID: jackery-explorer-300-plus-electric-chainsaw-14inch
🏛️ Device Data Source
Engineering Est. Safety Factor Applied

Derived from variant list (max of variants). Running worst case = Makita UC3551A (1740W at 14.5A). Surge worst case = Makita UC3551A (5220W). Surge estimated using 3x motor-load multiplier policy (no OEM starting watts published for any electric chainsaw in this class).

⚡ Generator Specs Source
OEM Verified

Jackery Explorer 300 Plus User Manual (JE-300B)

Methodology informed by US Department of Energy (DOE) & EIA references where applicable. Our methodology →