Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V/240V available
This pairing clears the safety headroom. Required ~230W running and 230W surge; the Zendure SuperBase V4600 is rated 3800W / 3800W.
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
Device output type must match generator output.
120V required -> 120V/240V available
Continuous draw with safety buffer applied.
230W required -> 3,800W available (3,570W headroom)
Startup peak with safety buffer applied.
230W required -> 3,800W available (3,570W headroom)
Runtime context only. It does not change the electrical compatibility verdict.
Continuous estimate: 16.1h
Device profile reference: up to 3h per day.
Power bars show required versus available output for each gate.
View full compatibility reportQuick compatibility, required headroom, and model-specific context at a glance.
3 of 3 models are SAFE or TIGHT. Most demanding model: JMGO N1S 4K (200W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| Anker Nebula Mars 3 | 150W | 150W | Safe | ~21.5h | OEM Manual |
Show expert analysisTechnical: Running load is 150W from the OEM specifications section. This is a high-output portable projector profile and should be treated as a continuous electronic load. Field note: Use AC output for compatibility checks. This model includes an internal battery, which can extend total session time in real use. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
| JMGO N1S 4K | 200W | 200W | Safe | ~16.1h | Engineering Est. |
Show expert analysisTechnical: The manual provides input current and voltage range but not a direct consumption number. 200W is a conservative worst-case estimate derived from the OEM input rating. Field note: If a detailed model spec sheet with direct power consumption becomes available, this variant should be updated from estimated to direct OEM watts. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
| Samsung The Freestyle Gen 2 (SP-LFF3CLAX) | 50W | 50W | Safe | ~64.5h | Engineering Est. |
Show expert analysisTechnical: This model is USB-C power capable. The OEM guide explicitly requires a PD source with single-port output of at least 50W. Field note: When available, use a 60W+ USB-C PD port on the power station to avoid unnecessary inverter conversion losses. Can a portable power station run a portable projector for movie night? Yes. This device profile is 200W at 120V with low startup surge, so any compatible power station must first clear that power threshold; battery capacity then determines how long your movie session lasts. | |||||
This unit ranks #24 of 33 compatible generators for this device by buffered margin (Overkill class).
33 of 33 generators are SAFE+TIGHT for Portable Projector.
Fit class uses buffered needs (running and surge) for this device.
Outdoor Movie Night
Select Your Model:
Free Tools
At 3800W continuous, the SuperBase V4600 handles most residential loads comfortably. The conservative surge rating (no hardware surge above continuous) means high-inrush devices like air compressors and well pumps may trigger protection cutoffs โ always check surge requirements. The 4608Wh base capacity provides 12+ hours for moderate loads, and the modular B4600 satellite system scales to 23kWh for multi-day outages. Solar input accepts up to 1500W (150V ร 10A) via XT90, though the single-port design limits parallel panel configurations.
The SuperBase V4600 uses LiFePO4 chemistry rated for 3,000+ cycles. The GridFlow 2.0 system provides 1ms UPS switchover, making it suitable for sensitive medical and computing equipment. The 120V/240V selective output supports both standard and high-voltage appliances. Source: Zendure official US product page (manufacturer documentation).
Keep your Portable Projector running with solar โข MPPT: 12โ 150V โข Max: 1500W
Smart Value 400W Panel
Adapter required: MC4 -> XT90.
Smart Value 400W Panel
Adapter required: MC4 -> XT90.
Yes. The Zendure SuperBase V4600 provides 3800W running / 3800W surge. The Portable Projector needs 230W / 230W (including 15% buffer). That leaves 3570W of running headroom and 3570W of surge margin.
Approximately 16.1 hours, based on the Portable Projector's 200W draw and the Zendure SuperBase V4600's 4608Wh capacity (70% usable after real-world losses).
With 1000W allocated to the Portable Projector, the Zendure SuperBase V4600 still has ~1840W of margin. These devices could run simultaneously:
Power Tip: To get the most out of your Zendure SuperBase V4600, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Portable Projector
Ranked by budget, runtime, and overall compatibility.
Derived from variant list (max of variants). Running worst case = JMGO N1S 4K (200W from OEM manual input rating AC 100-240V 50/60Hz 2.0A, using 100V*2.0A worst-case). Surge worst case = JMGO N1S 4K (200W, electronic load with no motor inrush).
Zendure SuperBase V Official Product Page (US) โ full specifications
Similar-output alternatives you can compare side by side.