1
Voltage Gate
PASSDevice output type must match generator output.
120V required -> 120V available
No — the SOLIX C800 Plus is underpowered for a Corded Drill / Hammer Drill
Not a safe match. The generator's output falls below the Corded Drill / Hammer Drill's requirement.
- • Startup surge shortfall: needs 3240W (safe target ~3726W), generator provides 1600W.
Power Margin Analysis
1200W / 1600W Capacity Running 42W short
1242W required
Surge 2126W short
3726W required
Decision Gate Waterfall
Same decision gates as the engine: voltage, running, surge. Runtime is shown as operational context.
2
Running Gate
FAILContinuous draw with safety buffer applied.
1,242W required -> 1,200W available (42W short)
Required 1,242W required
Available 1,200W
3
Surge Gate
FAILStartup peak with safety buffer applied.
3,726W required -> 1,600W available (2,126W short)
Required 3,726W required
Available 1,600W
4
Runtime Insight
INFORuntime context only. It does not change the electrical compatibility verdict.
Runtime estimate appears after running and surge gates pass.
Power bars show required versus available output for each gate.
See generators that pass nativelyDecision Snapshot
Quick compatibility, required headroom, and model-specific context at a glance.
⚡
1200W
Running Power
🔋
768Wh
Capacity
⏱️
—
Est. Runtime
☀️
300W
Solar Input
Quick Compatibility Check
- 1 Running headroom: target 1242W; generator provides 1200W.
- 2 Surge headroom: target 3726W; generator provides 1600W.
- 3 Result: pick a higher-output unit for safe operation.
What To Do Instead
- 1 Underpowered: The Corded Drill / Hammer Drill needs 1242W running / 3726W surge (with 15% buffer). The SOLIX C800 Plus provides 1200W / 1600W.
- 2 Safe target: Look for a power station with at least 1242W continuous and 3726W surge at 120V.
- 3 Compatible alternative: The Explorer 2000 Plus (3000W / 6000W surge) clears this device's requirements.
Model-Specific Results
0 of 3 models are SAFE or TIGHT. Most demanding model: DeWalt DW130V (1/2" Spade Handle, 9A, Mixer) (3,240W surge).
| Model | Running | Surge | Verdict | Runtime | Source |
|---|---|---|---|---|---|
| DeWalt DW130V (1/2" Spade Handle, 9A, Mixer) | 1,080W | 3,240W | Fail | — | Engineering Est. |
Show expert analysisTechnical: **Running load:** 1080W from OEM specs (9.0A × 120V). **Estimated startup surge:** 3240W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Low-speed high-torque motor, 0-550 RPM variable speed, 1/2" keyed chuck. DeWalt lists 710W "Max Watts Out" — that's mechanical output power, not electrical input. Field note: The DW130V is the standard jobsite mud mixer in the US. At 9A it's the highest-draw tool in this set, but the real challenge is sustained load — mixing a 5-gallon bucket of mortar keeps the motor under heavy torque for 3-5 minutes straight. Size your power source for continuous 1080W output, not just peak capacity. Can a portable power station run the DeWalt DW130V mixer drill? Only if your power source can supply at least 1080W continuous and approximately 3240W surge at 120V. The sustained mixing load is the main challenge — this tool runs at near-maximum draw for minutes at a time. | |||||
| Bosch 11255VSR Bulldog Xtreme (SDS-plus, 8A, Rotary Hammer) | 960W | 2,880W | Fail | — | Engineering Est. |
Show expert analysisTechnical: **Running load:** 960W from OEM specs (8.0A × 120V). **Estimated startup surge:** 2880W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. SDS-plus rotary hammer, 3-mode operation (hammer+rotation, rotation only, hammer only), 0-1300 RPM, 0-5800 BPM, 2.0 ft-lbs impact energy. Field note: The Bulldog Xtreme is the best-selling SDS-plus rotary hammer in the US. At 960W running it's mid-range in this set, but the 2880W estimated surge requires a power station with adequate startup capacity. The 3-mode operation means you can use it as a light demo tool (hammer only) or a standard drill (rotation only) — same electrical draw regardless of mode. Can a portable power station run the Bosch Bulldog rotary hammer? Only if your power source can supply at least 960W continuous and approximately 2880W surge at 120V. The motor startup surge is the main challenge, not the running watts. | |||||
| Black+Decker DR260C (3/8", 5.5A, Budget) | 660W | 1,980W | Fail | — | Engineering Est. |
Show expert analysisTechnical: **Running load:** 660W from OEM nameplate (5.5A × 120V). **Estimated startup surge:** 1980W at 3x running (motor-load multiplier — no OEM starting watts published). **Voltage:** 120V AC. Variable-speed motor, 0-2500 RPM, 3/8" keyless chuck. Field note: The DR260C is the most power-station-friendly corded drill in this set. At 660W running and an estimated 1980W surge, it works with most power stations rated 1000W+ with adequate surge capacity. This is the budget option for DIYers who don't want to manage cordless batteries — but for serious jobsite work, the DW130V or Bulldog are the right tools. Can a small power station run the Black+Decker DR260C? Most stations rated 1000W+ continuous with 2000W surge can handle it. At 660W running with an estimated 1980W surge, this is the easiest corded drill to power in this set. | |||||
How This Pairing Performs Across Our Database
This unit is outside the compatible set; 18 of 33 generators pass SAFE/TIGHT for this device.
How Corded Drill / Hammer Drill Performs Across 33 Tested Generators
18 of 33 generators are SAFE+TIGHT for Corded Drill / Hammer Drill.
18
Safe+Tight
Safe 13 (39%)
Tight 5 (15%)
Fail 15 (45%)
Power Comparison: Anker SOLIX C800 Plus vs Top Alternatives for Corded Drill / Hammer Drill
Anker SOLIX C800 Plus Fail
Current unit
Running 1,200W
Surge 1,600W
Fit class uses buffered needs (running and surge) for this device.
Specs & Surge Analysis
Power Tools
Corded Drill / Hammer Drill
Job Site Power
Select Your Model:
1080W
Running
3240W
Surge
120V
Required
True Surge™ Analysis
Safety Buffer: +15% Running Power Usage 103% Utilization
1242W required 1200W Capacity
42W short
Surge/Startup Peak 233% Utilization
3726W required 1600W Capacity
2126W short
Voltage Match 120V ↔ 120V ✓
Startup Surge Visual
Startup Surge
Corded Drill / Hammer Drill vs SOLIX C800 Plus
Startup surge exceeds the power station limit. A soft starter may resolve the surge gap.
Compatible Alternatives to SOLIX C800 Plus
These generators meet Corded Drill / Hammer Drill's voltage, running, and surge requirements.
Best Value 
Explorer 2000 Plus
3000W • 2042Wh
Runtime at your load
~1.3h
Capacity Fit Expandable to 12000Wh
Lowest capacity that still clears surge + running load.
Max Runtime 
Delta Pro
3600W • 3600Wh
Runtime at your load
~2.3h
Longest Runtime Expandable to 25000Wh
Expandable to 25000Wh.
Compare Similar Units
Free Tools
Station Tools
Generator Insights
The 1600W surge rating can support startup sequences for refrigerator compressors, well pumps, and similar inductive motor loads that draw 25 to 33 percent over running current during initial engagement. Once running, the 1200W continuous output can handle typical kitchen appliances, electronics, and power tools within rated limits. This combination addresses both inrush events and sustained runtime needs in backup scenarios.
This unit uses LFP chemistry, a battery architecture chosen for thermal stability in consumer power stations. The 768Wh capacity and 1200W continuous output allow sustained operation without thermal stress under typical residential loads. Source: Anker SOLIX C800 Plus Tech Specs (manufacturer documentation).
Technical Analysis
Spec-Based • No GuaranteesTechnical Breakdown
Running range: 660W (5.5A) to 1080W (9A) depending on motor size and tool type. Estimated surge range: 1980W to 3240W at 3x running (motor-load multiplier — no corded drill manufacturer publishes starting watts). Voltage: 120V AC for all corded models.
Expected Behavior
Corded drills and hammer drills draw near-maximum rated power under load and drop significantly between operations. Mixer drills are an exception — they run at sustained high load for minutes while mixing mortar or compound. At 1 hour daily use, energy consumption ranges from 660 to 1080 Wh depending on model.
Field Note
In 2025, corded drills are primarily a jobsite tool — mud mixers and rotary hammers where batteries overheat too quickly. Startup surge is the main compatibility concern: a drill that draws 1080W running may need 3240W briefly at startup. Size for surge capacity first, continuous output second.
Frequently Asked Questions
Can the Anker SOLIX C800 Plus power a Corded Drill / Hammer Drill?
No. The Anker SOLIX C800 Plus falls short on both running (1200W offered vs 1242W needed) and surge (1600W offered vs 3726W needed). Safe targets include a 15% buffer for the Corded Drill / Hammer Drill's motor load profile.
How long will the SOLIX C800 Plus run a Corded Drill / Hammer Drill?
No reliable runtime estimate — this pairing is not compatible. The Anker SOLIX C800 Plus cannot safely power the Corded Drill / Hammer Drill. See compatible alternatives above for power stations that meet this device's requirements.
Power Tip: To get the most out of your SOLIX C800 Plus, keep it in a well-ventilated area. Extreme temperatures can slightly reduce the efficiency of the LFP/NMC cells.
Compare all 33 generators for the Corded Drill / Hammer Drill
Ranked by budget, runtime, and overall compatibility.
Technical Sourcing & Verification
ID: anker-solix-c800-plus-drill-corded 🏛️ Device Data Source
Engineering Est. Safety Factor Applied
Derived from variant list (max of variants). Running worst case = DeWalt DW130V (1080W at 9.0A). Surge worst case = DeWalt DW130V (3240W). Surge estimated using 3x motor-load multiplier policy (no OEM starting watts published for any corded drill in this class).
⚡ Generator Specs Source
OEM Verified
Anker SOLIX C800 Plus User Manual (EN-US)
Methodology informed by US Department of Energy (DOE) & EIA references where applicable.
Our methodology →
Compare these models
Similar-output alternatives you can compare side by side.